Vespa 125 VNB4 1962 1:18 Scale Scooter

Vespa 125 VNB4 1962

VNA/VNB was the prefix for the 125cc models. The "A" were the first ones produced and were then followed by the "B" models when the rear of the frame was flattened out.
With the exception of the headset, the bodies on the VNA/VNB and VBA/VBB are identical.

Early 125cc scooters had a small taillight which was similar to that on the handlebars.The design was later changed and it had a red lens on top. This taillight was then used on the 125cc models. The VNA/VNB 125cc models used a small square shaped speedometer. Late 125cc Vespas used the clamshell speedometer as well. Early VNA's had a split headset design which allowed for easy access to the control cables. Piaggio discontinued using this design on later versions of the VNA, and did not add this feature to other Vespas until the advent of the P-series in the late 1970's.

Model Details

A Stunningly accurate 1:18 Scale model.

Model is approximately 10cm x 5.5cm

Fixed to a display stand that can be detached by removing a screw.

Metal & Plastic construction.

Not suitable for children under 14 years.

Piaggio & C S.p.A licenced official model by Centauria S.r.l

Packaging may have warehouse storage, handling and delivery wear.

Please Note: The blister pack has been opened at the bottom to remove the model for use in the images shown. It has then been replaced into the blister pack and secured with transparent tape.